EXPLOSION DRAWING
This is the KL-1911 4.5mm Schematic Co2 Ver Explosion Drawing. Use this diagram and chart to find the Airgun part you need. This information is for all Krown Land 1911 4.5mm Air Pistols found on the Just Air Guns website within the Air Pistols section.
| 1 | BARREL BEARING |
| 2-45 | SLIDE 4.5 |
| 3 | RECOIL SPRING PLUG |
| 4-1 | OUTER BARREL (LONGEST) |
| 5-45 | INNER BARREL 4.5 |
| 6-45 | HOP UP CHAMBER 4.5 |
| 7-45 | HOP UP BUCKING |
| 8 | RECOIL SPRING |
| 9 | RECOIL SPRING GUIDE |
| 12 | SCREW |
| 14 | PISTON HEAD 4.5 |
| 15 | NOZZLE SPRING |
| 16-45 | AIR NOZZLE BASE |
| 19 | HAMMER BASE |
| 20 | HAMMER AXLE |
| 21 | SEAR BASE |
| 22 | SEAR SPRING |
| 23 | IMPACT PIN |
| 24 | SEAR |
| 25 | DISCONNECTOR |
| 26 | SHEAR SPRING |
| 27 | SHEAR |
| 28 | HAMMER SET |
| 29 | TRIGGER |
| 30 | MAGAZINE CATCH |
| 31 | LOWER RECEIVER (GAS) |
| 32 | HAMMER PIN |
| 33 | SEAR PIN |
| 34 | PLUNGER BASE |
| 35 | SLIDE STOP |
| 36 | GRIP SAFETY |
| 37 | HAMMER SPRING HOUSING PIN |
| 38 | PLUNGER SET |
| 39 | SAFETY |
| 42 | SEAR SPRING |
| 43 | HAMMER SPRING SCREW |
| 44 | HAMMER SPRING |
| 45 | HAMMER SPRING HOUSING |
| 46 | LANYARD MOUNT |
| 48 | GRIP SET (CO2) |
| 49 | GRIP SCREW (CO2) |
| 50 | LOWER RECEIVER (CO2) |
| 51 | AIR NOZZLE (CO2) |
| 52 | PISTON HEAD 4.5 |
| A1-45 | MAGAZINE LIP |
| A2-45 | AIR NOZZLE RUBBER |
| A9-45 | MAGAZINE SPRING |
| A10 | MAGAZINE BAR |
| A11 | PIN |
| A12 | MAGAZINE FRAME 4.5 |
| A13 | VALVE CO2 |
| A14 | CARTRIDGE STAD CO2 |
| A15 | SCREW |
| CPG-02 | SEAL |
KL-1911 4.5MM SCHEMATIC CO2 VER EXPLOSION DRAWING
This is the Explosion Drawing for the KL 1911 4.5mm Schematic Co2 Ver.
The KL 1911 4.5mm CO2 Schematic, often called an “explosion drawing,” is a detailed visual representation that dissects the air pistol into its fundamental parts, showcasing how each component fits the overall design.
It is presented in an exploded format, where individual parts, such as the slide, barrel, trigger assembly, CO2 cartridge chamber, magazine, and internal springs, are separated but aligned to illustrate their precise arrangement within the airgun.
Each part is labelled with a reference number and name, providing a clear view of the internal mechanism, including the firing pin, hammer, safety, and magazine release components. This layout helps users understand the assembly and disassembly process, making it ideal for troubleshooting, maintenance, and customization.
If you need to replace or upgrade parts of your air gun, find the part in the diagram. Then, in the list of parts below, click on the part name to ensure the part number is correct.
If you have any questions about this page, please use the contact information on this website to contact our support team.