Trimex Arms PCP Airgun Hand Pump 450Psi 300Bar TX-XBD-5

PCP AIRGUN HAND PUMP TX-XBD-5

Introducing the Trimex Arms PCP Airgun Hand Pump 450Psi 300Bar TX-XBD-5. The Trimex Arms PCP Airgun Hand Pump is a compact, high-performance manual pump designed for precision and convenience. Engineered to deliver up to 4500 PSI (300 Bar), this pump is an essential accessory for PCP (Pre-Charged Pneumatic) airgun enthusiasts seeking reliability and efficiency in their airgun charging needs.

FEATURES

• High-Pressure Capability: Achieves pressures up to 4500 PSI (300 Bar), making it ideal for filling most PCP airgun reservoirs quickly and safely.
• Durable Construction: Built with high-grade stainless steel and aluminium, ensuring durability and resistance to wear and corrosion over time.
• Compact and Portable: Lightweight and compact design for easy portability, making it suitable for field use or travel.
• Ergonomic Design: Fitted with comfortable, non-slip handles to provide a firm grip and reduce hand fatigue during operation.
• Integrated Air Filter: Equipped with an advanced air filter to remove moisture and debris, protecting your airgun’s internal components.
• Universal Compatibility: Compatible with a wide range of PCP airguns via the included flexible high-pressure hose and universal connector.
• User-Friendly Maintenance: Easy to disassemble and clean for long-term use, ensuring consistent performance with minimal maintenance.

The Trimex Arms PCP Airgun Hand Pump 450Psi 300Bar TX-XBD-5 delivers unmatched reliability and performance in a sleek, portable design, making it the go-to solution for any PCP airgun owner. Whether you’re on the range or in the field, this pump ensures your airgun is ready to perform at its best.

ASSEMBLY INSTRUCTIONS 

1. Fasten the handle to the pump with the two screws supplied.
2. Fit the foot pedal with two screws and the tool supplied.
3. Install the pressure gauge manometer carefully into the pump.
4. Insert the high-pressure hose with the provided multi-tool.
5. Fit and screw down the bleed valve screw on the base.
6. Remove the plug from the female connector of the hose/filter.
7. Insert your required fill probe (not supplied with pump).

HOW TO USE THE PUMP

1. Do not pump too fast – the maximum frequency is 50 times per minute.
2. Very high pressure; do not close the air outlet when it is working.
3. Pressure should not exceed the recommended pressure of 4500 psi.
4. Pump slowly and deliberately. Stop at the top and bottom of each stroke (1-2 seconds) to let the airflow through the tiny holes inside the pump.
5. Do not fail to go all the way to the end of each stroke; make each upstroke count, as most of the work is accomplished in the last 2-3 cm of pump rod travel.

WARNINGS AND MAINTENANCE 

1. Do not pump for more than 5 minutes. After each pumping period, leave the pump for 15 minutes to cool.
2. Open the pump bleed screw to relieve the pressure in the hose. Do not keep the pressure in the pump when not in use.
3. Keep the pump dry and clean, and store the pump indoors, away from extreme temperatures.
4. The pump needs re-oiling after 800 pumps. Please see the user manual for more info.

IN THE BOX

• Main Pump
• Pump Handlebar with Rubber Grips
• Foot Pedal
• Easy Fit Pressure Gauge Unit
• Assembled Hose with Quick-Release Plugs and Filter
• Bleed Valve
• Reducer Brass Unit
• Small Tube of Lubricant Oil
• Spear Small Filters
• Replacement O-rings and Springs
• Allen Keys and Screws
• Multi-Tool Wrench Tool